It’s common knowledge that hospitals are a place that needs uninterrupted power and the need is not just for convenience. Life support machines, complex surgical equipment, and essential medical devices everything relies on a steady supply of electricity. There can be severe consequences if there’s a sudden power outage. It can put patient safety at immediate risk and even disturb healthcare services. Because of this, hospitals keep emergency generators ready to kick-in right at the moment without any delays. In this blog, we will discuss the benefits of fuel polishing systems in hospital power backup.
What are the Risks of Stored Fuel in Hospital Emergency Generators?
The fuel that is used in the power backup system of the hospitals are often stored for longer durations, it varies between months to years. This extended storage period makes the fuel prone to issues such as degradation and contamination. There can also be other common issues like water build-up in the tank, growth of tiny organisms known as “diesel bug” (bacteria, fungi, yeast) and even sediment settlement like rust or sludge. All of this can cause a serious problem for the generator and interrupt work. They can even clog the fuel filters, damage the injectors and generators and can then fail to start or run properly due to power outage and affect patient care and safety.
What Does Fuel Polishing System have to do with Power Reliability?
A fuel polishing system is especially designed to clean and restore the quality of stored diesel fuel which makes it ideal for hospital emergency generators. Its main job is to ensure that the fuel is always in a prime condition and can be used immediately when needed. The system works by continuously circulating the fuel from the storage tank through a series of advanced filters. This way it removes the accumulated water, sludge, microbial growth and other solid contaminants. With constant cleaning, the fuel polishing system is needed for hospital backup power reliability, letting it run efficiently during an emergency.
( Also Read: Why are Fuel Polishing Services for Emergencies so Important?)
What are the Benefits of Fuel Polishing System for Hospital Power Backup?
You can get a lot of benefits from implementing a fuel polishing system in hospital power backup. It will directly contribute to both operational efficiency and patient safety. Here are some of them that prove that investing in fuel polishing system is a smart and necessary investment:
- Prevent Generator Failure:
The best part about having a fuel polishing system is that you can ensure that the emergency generator starts and runs smoothly when there is no power. Removing harmful contaminants helps you prevent common issues which can stop the generator from working during an emergency. - Extend Fuel Life:
With fuel polishing the diesel fuel can be stored for much longer periods without it getting degraded. This means that hospitals can maintain their fuel reserves which will reduce their need for frequent and costly fuel replacement. This way, the fuel remains clean and ready to use. - Improve Generator Performance:
If the fuel is clean then it burns more efficiently and leads to better fuel economy with reduced emissions. This way, the generator parts get less wear and tear and over time that improves the performance as well as lifespan of the emergency equipment. - Reduce Maintenance Cost:
You can also prevent the damage that is caused by contaminated fuel with fuel polishing. Since it lowers the need for expensive repairs and frequent filter changes, you can save on operational costs related to power backup systems. - Ensure Regulatory Compliance:
Hospitals need to meet the strict regulations for their emergency power systems which are set by bodies like NFPA (National Fire Protection Association) and the Joint Commision. With fuel polishing, these standards get easier to meet by maintaining fuel cleanliness which is a key requirement for compliant operation.