Optimal Fuel Quality - Reliable Power | Keeping the Lights on

If you have a company that works with diesel fuel, then you will probably have had to deal with the issue: algae in diesel. We can imagine that it has been an unhappy experience. The algae reduce the performance of your engine and impact your bottom line. Annoying, but certainly not insurmountable. Njord Filtration has developed a system that gives those algae no chance to pollute your diesel.

An end to algae in diesel

It evn sounds dirty: algae in diesel. You do not want that stuff in your diesel. Njord Filtration can help you not only to clean up the algae plague, but also to prevent it in the future. After all, you want your engines to function optimally. Therefore, let us check your fuel for you. With our advanced equipment, we can quickly view how big the problem is and what should be done about it. Once the problem has been identified, we start to work to make the diesel algae free. Algae in diesel will then belong to your company’s past quickly. Once the diesel is completely clean again, it is a key task to keep clean in the future. Again, we can help you with our technology here.

Fighting algae yourself

You can contract our professional staff, but we can also supply equipment with which you can clean up the algae and your diesel. Njord Filtration is a young company, but our method are very effective. We want to make it as easy as possible to keep your diesel algae and bacteria free. If you are using our products and services, you are always protected against micro-organism and algae in diesel are no longer a problem for your business.

Please contact us to discuss the best solution for you.

Problem Solver

Our solution

FUEL TEST

If there are problems with filters, injectors, pumps or diesel quality in general, it is advisable to take a bottom sample from the tank(s) and have it analysed. Sometime the diesel is so filthy that the conclusion is obvious: the diesel must be cleaned.

We offer a sampling and analysis service as well as sampling sets to take your own samples. These can also be sent to us for analysis, or can be tested for microorganisms with Liqui-Cult.

REMOVING CONTAMINATION

If contamination of the diesel with water, sediment and/or microorganisms is discovered, it is important to remove the contamination from the tank(s) and to bring the fuel back into optimal condition.

To this end we offer a tank and fuel cleaning service as well as the equipment to recondition the fuel yourself. If we clean the tank and fuel, before and after samples are taken to demonstrate the effect of service provided.

PREVENTIVE MEASURES

After the contamination has been removed, it is usually best to ensure that it cannot reoccur. With modern diesel, however, the chance of this is relatively high. There are a number of preventative measures, products and systems available for this. The choice for one of these is different for each situation, client and available budget.

We offer sampling services, complete fuel maintenance contracts and installation of preventative products and systems according to the KIWA BRL-K903-08 norm.
There are a number of options for the tanks as well as the engines/burners:

IN-LINE QUALITY MEASUREMENT

If so desired, the quality of the fuel with regard to water and sediment levels can be measured in-line in order to control the quality or to adjust the filtration system.

Njord provides: